About Communication Commands
32
ZFX-C Serial Communication Command Reference
Backing up image data from the Controller to an SD card
This command backs up image data from the Controller to an SD card.
< Command format >
< Response format >
< Explanation of parameters >
Save memory No. Specifies the No. of the save memory for backing up the image data to. (0 to 99)
When "-1" is specified for the Save memory No., the latest image data is specified.
File name Files can be given any file name up to 5 characters long. (Entry of a file extension is not
necessary.)
When performing measurement on two cameras, the image data of both cameras is
saved. In this case, the file names are automatically appended with "C0" and "C1".
Image data from camera 0: file name_C0.BYR or file name_C1.GRY
Image data from camera 1: file name_C1.BYR or file name_C1.GRY
When processing ends successfully
When processing fails
When an SD card is not inserted
When there is no free space on the SD card
To Next Page
Loading...
Need help?
General
