On Call Extra - Page 16

To Next Page

To Previous Page

Press the ◄ button to turn the meter beep “On” and “Off”. Press the ► button

to confirm your selection.

7. Ketone Indicator: The meter comes with the Ketone indicator feature disabled.

Press the ◄ button to switch between turning the Ketone indicator “On” and

“Off”. Press the ► button to confirm your selection. When the Ketone indicator

is enabled, if the test result is higher than 16.7 mmol/L (300 mg/dL), the symbol

of "Ketone?" will appear on the display.

8. Hyper Indicator: The meter comes with the Hyper indicator feature disabled.

Press the ◄ button to turn the Hyper indicator “On” or “Off”. Press the ► button

to confirm your selection. When the Hyper indicator is “Off”, pressing the ►

button will go to the next Hypo indicator set up. When the Hyper indicator is

“On”, pressing the ► button will go to the Hyper indicator level set up. At the

Hyper level set up, press the ◄ button to adjust the Hyper level. Press the ►

button to go to the Hypo indicator set up.