Onbon OVP-L1X - Mode setting; Save user mode; Read user mode; Clear user mode

www.onbonbx.com Page
15
 Saturation：adjust range 0~100.
 Dynamic contrast：adjust range 0~4.
2. Color temperature
Click “color temperature”, users can modify the color temperature of image. There are 4
styles: warm, cold, natural,custom. For specific color temperature data, user can adjust by
dragging “RED”,”GREEN”, and “BLUE”.
3. Audio effect
Click “audio effect”, select “open” or “close”audio effect, and adjust the volume.
Mode setting
Users can save their own modes according to their requirements, it support maximum 8
groups modes. Image layout, signal source, cropping, effect can be saved into user mode.
After you set all the parameters, you can click “user mode 1” --”save user mode” as to
save user mode 1, like below.
 Save user mode：Save present parameters into user mode.
 Read user mode：User can find out all parameters which is saved to this user mode by
read user mode.