Onbon OVP-L1X - VGA adjustment; VGA automatic adjustment; ADC calibration; VGA ADC adjustment

www.onbonbx.com Page
17
 When there’s excursion of VGA input signal in display, users can click “Auto adjust” as
to display correctly. And if“Auto adjust”is invalid, users can adjust“VGA horizontal start”
and “VGA vertical start” manually.
 Adjust horizontal station of VGA input signal, adjust range 0-300.
 Adjust vertical station of VGA input signal, adjust range 0-300.
 If the screen of GA input signal source is a little darker, users can adjust by “VGA ADC” or
“DV ADC”.
Other Settings
Users can set “output status” and “factory reset”, as below.