10 WWW.ONEFORALL.COM
Code blink out
(To find out which code is currently programmed)
If you have set up your KAMELEON 3 via the Search Method, you can blink
back your code for future reference. Please note that the IR Indicator will
indicate the 4 digits by animated blink(s).
Example: To blink out your television code:
1.
Press the TV key on your KAMELEON 3.
2. Press and hold down the MAGIC key until
the rabbit
comes out of the hat.
3. Press 9 9 0, the IR Indicator will light up twice.
4. For the first digit of your four-digit code,
press 1 and count the blinks of the IR Indicator.
If there are no blinks, the digit is “0”.
5. For the second digit, press 2 and count the
animated blinks. If there are no blinks,
the digit is “0”.
6. For the third digit, press 3 and count the
animated blinks. If there are no blinks,
the digit is “0”.
7. For the fourth digit, press 4 and count the
animated blinks. If there are no blinks,
the digit is “0”.
Now you have found your four-digit code.
- To blink back the code for your other devices follow the instructions above,
only press the appropriate device key during step 1.
Quick code Reference
Write down the codes for your devices in the boxes below for quick and
easy reference.
■■ ■■ ■■ ■■
■■ ■■ ■■ ■■
■■ ■■ ■■ ■■
To Next Page
Loading...
