To Next PageTo Next Page
Need help?Do you have a question about the onga SMH45 and is the answer not in the manual?
Details specifications like inlet/outlet size, temperature range, IP rating, and electrical supply.
Inspect pump for shipping damage and ensure suction piping is free of air leaks.
Protect the pump from weather, chemicals, dust, and vermin using a weatherproof enclosure.
Connect pipes carefully, support them to avoid strain, and use teflon tape for sealing.
Position the pump close to the water source on a separate footing.
Arrange for an electrician to install an outdoor 10A GPO electrical outlet near the pump.
Ensure suction pipe is kept short, crush-resistant, air-tight, and submerged.
Discharge hose/pipe diameter and length affect pressure/flow. Ensure pressure ratings exceed pump max.
Ensure pump has water before operating; fill pump body and suction line if needed.
Connect pump using provided connectors to a suitable socket outlet, avoid extension cords.
Ensure pump is primed, check motor rotation direction (clockwise).
Protects pump parts from overheating due to running dry; reset using condenser box switch.
Steps to restore operation after a malfunction, involving switching off and cooling down.
Requires minimal attention; periodically check pressure and power absorption for wear.
General| Brand | onga |
|---|---|
| Model | SMH45 |
| Category | Water Pump |
| Language | English |
