Onicon system-10 - Isolated Analog Output(S)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com
System-10-P1 Manual 09/15 - 0656-11 / 18320 Page 24
3.3.4 Isolated Analog Output(s) (Optional):
The System-10 can be congured to provide up to four isolated analog outputs of the
following ve parameters: supply temperature, return temperature, ow rate, BTU rate and
delta temperature. The output type, 4-20 mA, 0-10 VDC or 5 VDC is eld congurable. The
selected outputs and associated scaling are congured at the factory. See the calibration sheet
or label, located on the inside cover, for analog output conguration information.
Please Note: If System-10 is ordered with a ow meter capable of producing an analog
output, ow rate analog output will be available at Terminal T4 from ow meter.
J1
5
G
60HZ
1
J2-1
+15 +24
J2-12
G G
10
R7
H3
R1
20075-50 REV. A
LED1
T1
D1
D2
VAR1
F1
1/4 AMP
TB1
D4
D3
H1
1
L1 N Not Used