EasyManuals Logo

Onkyo A-9210 User Manual

Onkyo A-9210
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Connecting
a
graphic
equalizer
INPUT
SELECTOR
TAPE-2
indicator
TAPE-2
MONITOR
EQUALIZER
TAPE-2
MONITOR
SOURCE
um
TAPE-2
INPUT
SELECTOR
INPUT
SELECTOR
TAPE-2
TAPE-+
TUNER
co
When
connecting
the
A-9210
to
a
graphic
equalizer,
connect
the
graphic
equalizer’s
input
jacks
to
the
A-9210’s
TAPE-2
REC
jacks.
Also,
connect
the
graphic
equalizer’s
output
terminals
to
the
A-9210’s
TAPE-2
PLAY
jacks.
1.
Press
the
TAPE-2
MONITOR
button
to
the
TAPE-2
position,
and
TAPE-2
indicator
will
illuminate.
Select
CD,
TUNER,
LINE,
TAPE-1/
DAT
or
PHONO
(whichever
one
you
want
to
listen
to)
on
the
INPUT
SELECTOR.
Operate
the
graphic
equalizer.
.
Begin
playing.
Depending
on
the
particular
graphic
equalizer
used,
it
may
provide
features
such
as
muting
and
balance,
as
well
as
tone
control
(equalization).
For
the
equalization
of
a
source
other
than
a
CD,
tuner,
or
phono,
connect
the
source
device
to
the
amplifier’s
CD,
TUNER,
or
LINE
input
jacks.
(If
the
device
is
connected
to
a
jack
other
than
the
CD,
TUNER,
LINE
or
PHONO
input
jacks,
equalization
is
not
possi-
ble.)
10

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo A-9210 and is the answer not in the manual?

Onkyo A-9210 Specifications

Power IconPower
power output40 watts per channel at 8 ohms
power output (DIN)2 x 60 watts at 4 ohms, 2 x 50 watts at 8 ohms
Audio Performance IconAudio Performance
total harmonic distortion0.08% at rated power
IM distortion0.08% at rated power
damping factor150 at 8 ohms
Frequency and Sensitivity IconFrequency and Sensitivity
frequency response15 Hz—50 kHz +1 dB
phono input sensitivity/impedance2.5 mV/50 kohms
tuner/CD/line input sensitivity/impedance150 mV/25 kohms
Controls IconControls
bass control+8 dB at 100 Hz
treble control+8 dB at 10 kHz
loudness control+8 dB at 100 Hz, +3 dB at 10 kHz
Signal to Noise Ratio IconSignal to Noise Ratio
phono SNR84 dB (5 mV input)
source direct SNR104 dB (0.5 V input)
General Specifications IconGeneral Specifications
power supply (European and Australian models)AC 230 V, 50 Hz
power supply (Worldwide models)AC 120 V and 220 V switchable, 50 Hz/60 Hz
dimensions455 (W) x 120 (H) x 332 (D) mm
Remote Control IconRemote Control
transmitterInfrared
signal rangeApprox. 5 meters
power supplyTwo “AA” batteries (1.5 V x 2)
Weight and Dimensions IconWeight and Dimensions
weight7.1 kg
remote control dimensions55 (W) x 18 (H) x 194 (D) mm
remote control weight100 grams
View in Manual

Related product manuals