Onkyo A 9555

12
Connecting the A-9755/A-9555—Continued
Connecting a Tuner
Use an analog audio cable to connect the
A-9755/A-9555’s TUNER L/R jacks to the analog
audio output jacks on the tuner, as shown.
Connecting a Cassette Deck
Use an analog audio cable to connect the
A-9755/A-9555’s TAPE IN L/R jacks to the cassette
deck’s analog audio output jacks, and use another ana-
log audio cable to connect the A-9755/A-9555’s TAPE
OUT L/R jacks to the cassette deck’s analog audio input
jacks, as shown.
Connecting an MD Recorder
Use an analog audio cable to connect the
A-9755/A-9555’s MD IN L/R jacks to the MD
recorder’s analog audio output jacks, and use another
analog audio cable to connect the A-9755/A-9555’s MD
OUT L/R jacks to the MD recorder’s analog audio input
jacks, as shown.
Connecting a Remote Interactive Dock
(RI Dock)
Use an analog audio cable to connect the
A-9755/A-9555’s HDD IN L/R jacks to the RI Dock’s
analog audio output jacks, and use an cable to con-
nect the A-9755/A-9555’s jack to the RI Dock’s
jack, as shown.
Note:
If you use the Onkyo Remote Interactive Dock (DS-
A1), flip the RI MODE switch to “HDD” which is
located on the underside.
Connecting a TV or Other Component with
an Audio Output
Use an analog audio cable to connect the
A-9755/A-9555’s LINE L/R jacks to the analog audio
output jacks on the TV or other component, as shown.
Note:
If your TV has no audio output, you can connect the
A-9755/A-9555 to an audio output on your VCR and
use its tuner.
OUT
(IN)
REC
(OUT)
PLAY
/
(IN)
REC
(OUT)
PLAY
R
AUDIO OUT
----
L
Remote Interactive
Dock
AUDIO OUT