Onkyo A-SV210 User Manual

Recording a source
TAPE-2 MONITOR
TAPE-2 MONITOR
VDP,VCR (VIDEO-
2:5
VIDEO-1'VDP
1)
Turntable
TUNER
Tapedeck
Connect the graphic equalizer to the
TAPE-?2 jacks on the rear panel.
If a second tape deck 18 used, connect it to
the tape jacks on the graphic equalizer.
Also see “Connecting a tape deck” on page
7 when making connections.
Press the TAPE-2 MONITOR button.
Follow the graphic equalizer operating
instructions.
To record an equalized signal, use tape deck
2 (connected to the equalizer) for recording.
Video disc programs can be recorded onto
a VCR (VIDEO-2).
1. Load a disc in the video disc player,
and a blank tape in the VCR
(VIDEO-2).
2. Press the VIDEQ-1/VDP button.
3. Begin playback on the video disc
player and recording on the VCR.
During video tape editing, you can add the
desired sound on the recording VCR from
varlous audio program sources,
1. Insert the LD or tape that you want
to record into the VDP or VCR con-
nected to VIDEO-1.
2. Insert a blank video tape in the VCR
connected to VIDEO-2.
3. Press the VIDEO-1/VDP button.
4. Select the audio program source
(TAPE-1, TUNER, PHONO, CD)
5. Begin playback of the video con-
nected to the VIDEO-1 and also start
the sound source, then start record-
ing on the VIDEO-2 VCR.
Refer to the video disc player, video cam-
corder or VCR instruction manuals for
additional information.

Onkyo A-SV210 Specifications

General

Brand	Onkyo
Model	A-SV210
Category	Amplifier
Language	English