Onkyo A-SV210

Making speaker connections
1. Press down the lever.
2. Insert wire.
3. Return the lever.
SPEAKER A SPEAKER A
Rich _ SPEAKER B SPEAKER B
R ch You can connect two separate pairs of
Cc
speaker systems.
Please connect each speaker according to
the illustration, observing the correct con-
nections for R, L, + and —.
e Do not use unnecessarily long or
extremely thin speaker leads. If the DC
resistance of the speaker leads is too
high, the damping factor will decrease,
adversely affecting the sound quality.
e When using only one speaker or when
you wish to listen to monaural (mono),
the single speaker should never be con-
\ / nected in parallel to both the right and
FRONT SPEAKERS
R - —L left channel terminals at once.
t
") uy
ULF OI
eee eee
CAUTION
SPEAKERS IMPEDANCE:
FRONT A OR B: 8 OHMS MIN./SPEAKER
FRONT A+B: 16 OHMS MIN./SPEAKER
CENTER
SPEAKER po . va Connect the center speaker and rear speak-
ers (R) (L) to this unit.
REAR = REAR
SPEAKER SPEAKER
CENTER REAR SPEAKERS
SPEAKER L ch
CAUTION
SPEAKERS IMPEDANCE:
CENTER/REAR: 8 OHMS MIN./SPEAKER