17
Be sure to perform these settings when using
the player for the rst time.
Notes:
• Before turning on the power, check that the
connections between the player and other
devices are correct. Also, turn on the power
of the devices connected to the player
before turning on the player’s power.
• When using a Flat Screen TV or front
projector compatible with the Control
function, set Control with HDMI to On on
the connected device before turning on the
player’s power.
1 Turn on the TV’s power and switch the
input.
See the TV’s operating instructions for
instructions on operating the TV.
2 Turn on the player’s power.
Press z (ON/STANDBY).
Check that the Setup Navigator menu is
displayed.
* If the Setup Navigator menu is not
displayed
► Press HOME MENU to display the Home
Menu, select General setting → System →
Setup Navigator, then press ENTER.
3 Select the OSD language.
Use ▲/▼ to select, then press ENTER.
Choose
Previous
an OSD language before starting.
The language selected will be applied not only here
but aslo in other OSD windows, menus etc.
English
Deutsch
French
Italiano
Spanish
Hungarian
OK Next
page2/5 Setup Navigator
4 Select and set the video and audio
output terminals.
Use ▲/▼ to select, then press ENTER. See
page 32.
Auto
480p/576p
720p
1080i
1080p
1080/24p
Choose
Previous
a resolution that fit your TV.
Change will be applied immediately, you have 15s to
determine whether to save the setting or rollback to
prior resolution. Better performance will be provided
by a HDMI connection!
OK Next
page：3/5 Setup Navigator
5 Select the aspect ratio of your TV.
Use ▲/▼ to select, then press ENTER. See
page 32.
Choose
Previous
an aspect retio that fit your TV.
Change will be applied in next page, you should
determine whether to save the setting or rollback to
prior aspect ratio.
16:9 Full
16:9 Normal
4:3 Pan&Scan
4:3 Letterbox
OK Next
page：4/5 Setup Navigator
6 Finish the Setup Navigator menu.
Press ENTER.
To redo the settings from the start, select Go
Back.
Setting
Previous
wizard is to be finished!
Now press "ENTER" key to go to Home Menu. Please enjoy it.
OK Finish
page: 5/5 Setup Navigator
Chapter 3
Getting Started
Making settings using the Setup Navigator menu
SN29402235_BD-SP353_EnFrEsItDeNlSv_1510xx.indb 17 2015/10/20 14:36:32
To Next Page
Loading...
