Onkyo BD-SP353

33
En
Audio Output
1. Press HOME MENU.
[General Setting] menu is displayed.
2. Press ► to select [Audio Output], then
press ▼ .
3. Select an option, press ► to access.
Exit
Use cursor key to move focus, use “Enter” key
to select
Reture
Audio Output
Audio Setting
DRC Auto
Digital Output
HDMI Audio
Max Sampling Freque...
PCM
PCM
48KHz
Music Optimizer Off
4. Press ▲/▼ to select a setup option and
press ► .
5. Select the setting you wish to change and
press OK to conrm.
- Press ◄ to return to the previous menu.
- Press HOME MENU to exit the menu.
Audio Setting
• [Music Optimizer]
When compressed audio is subjected to
compression process, some parts may be
deleted. When you turn on the Music
Optimizer function, sound quality will be
improved by making up for the part that had
been deleted.
{On} – Turn on the Music Optimizer function.
{Off} – Turn off the Music Optimizer function.
• [Digital Output]
Select the output mode of optical jack, options
include Bitstream, PCM, Reencode and Off.
{Bitstream} – Output digital signal without
any processing.
{PCM} – Select this to output digital audio
signals converted to 2-channel audio signals.
{Reencode} – When a BD containing
secondary audio and interactive audio is
played, the two audio signals are mixed and
converted to Dolby Digital audio or DTS audio
for output.
{Off} – Select this function when digital audio
signals are not used.
SN29402235_BD-SP353_EnFrEsItDeNlSv_1510xx.indb 33 2015/10/20 14:36:35