Onkyo BD-SP353

29
En
5. Press ENTER to enter language setting.
Press ▲/▼ to select language.
Choose
Previous
an OSD language before starting.
The language selected will be applied not only here
but aslo in other OSD windows, menus etc.
English
Deutsch
French
Italiano
Spanish
Hungarian
OK Next
page2/5 Setup Navigator
6. Press ENTER to enter Resolution setting.
Auto
480p/576p
720p
1080i
1080p
1080/24p
Choose
Previous
a resolution that fit your TV.
Change will be applied immediately, you have 15s to
determine whether to save the setting or rollback to
prior resolution. Better performance will be provided
by a HDMI connection!
OK Next
page：3/5 Setup Navigator
Press ▲/▼ to select an option. Press ENTER.
Use ▲/▼ to select “Yes” or “No”.
Video Resolution
Previous
has been changed!
Does everything locks all right with this resolution?
Press Yes if you want to apply it. Press No to
rollback to previous one.
OK Next
page：3/5 Setup Navigator
14s
Yes
No
7. Press ENTER to enter Aspect ratio setting.
Choose
Previous
an aspect retio that fit your TV.
Change will be applied in next page, you should
determine whether to save the setting or rollback to
prior aspect ratio.
16:9 Full
16:9 Normal
4:3 Pan&Scan
4:3 Letterbox
OK Next
page：4/5 Setup Navigator
Press ▲/▼ to select an option. Press ENTER.
Setting
Previous
wizard is to be finished!
Now press "ENTER" key to go to Home Menu. Please enjoy it.
OK Finish
page: 5/5 Setup Navigator
8. Press ENTER to return General Setting
Menu.
• [Upgrade]
You may select to Upgrade the software from
the USB ash drive.
1. Connect the USB ash drive which contains
the upgrade le package.
2. Follow the instruction on the TV screen to
conrm upgrade operation.
- Upgrade complete the software, the
system will reboot after 5s or ENTER key is
pressed.
Notes:
• Do not unplug the power cord or remove
the USB drive during software updating.
Also, do not press the reset button during
updating. Otherwise, the updating will be
aborted and malfunction may occur with the
player.
• If the upgrade le package did not pass
the verication, error prompt is displayed ,
check the package again (such as the
package is not complete)
• Make sure the rmware version is not an
old version.
• [BUDA]
During insert more than 1GB empty USB
device, you can operate BD-Live function.
And Blu-ray DVD system will be automatic
name a BUDA content.
BUDA will display Information.
1. Press ENTER.
2. Follow the instruction on the TV screen to
select {BUDA Information}.
&YJU
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
3FUVSO
(FOFSBM4FUUJOH
4ZTUFN
-BOHVBHF
1MBZCBDL
1BSFOUBM-PDL
/FUXPSL
#6%"*OGPSNBUJPO
'SFFTJ[F.#
'NUCVEB
3. Press ENTER to select “Fmt buda”, BUDA
of les will be cleaned.
• [Quick Start]
{ On } - Select to shorten the required time to
boot up.
{ Off } - Select to perform normal bootup.
Language
Select the OSD(On-Screen Display)
Language, Disc Menu Language, Audio
Language, and Subtitle Language.
SN29402235_BD-SP353_EnFrEsItDeNlSv_1510xx.indb 29 2015/10/20 14:36:34