EasyManuals Logo

Onkyo CR-N775D User Manual

Onkyo CR-N775D
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
> Before Start > Part Names > Install > Initial Setup >Playback
Supplementary information | Advanced Setup | Others
29
En
When playing a device connected to the DIGITAL IN
COAXIAL terminal, press INPUT 2/1 repeatedly to
change the input on this unit to "COAXIAL".
When playing a device connected to the LINE IN
jacks, press INPUT 2/1 repeatedly to change the
input on this unit to "LINE".
2. Start play on the player.
0 When connected by a digital optical cable or digital
coaxial cable, this unit supports linear PCM signals
of up to 192 kHz/24 bits for input.
Connecting with Onkyo RI Components
By connecting an Onkyo component with RI jack to the
unit by using an RI cable and an analog audio cable,
you can link the unit’s power and input selection and
enable operation with this unit’s remote controller. For
details, refer to the instruction manual of the
component with the RI jack.
0 When connecting an Onkyo MD deck, you need to
change the name of the input selector. (ÄP42,
“Input Name”)
Change the name of the jack to which the external
device is connected, "COAXIAL", "OPTICAL", etc.,
to "MD".
a RI Cable, b Analog Audio Cable
0 If there are two RI connectors, the function of the two
connectors is the same. Both connectors can be
used.
0 Connection to RI connectors only does not work as
the system. Connect also an analog audio cable
correctly.
0 Some components may not support all RI functions.
COAXIAL
Asb
44.1kHz
LINE
Asb
a
b

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo CR-N775D and is the answer not in the manual?

Onkyo CR-N775D Specifications

General IconGeneral
Receiver type-
Input sensitivity400 mV
Pre-out connectivityYes
Audio output channels2.0 channels
Power output per channel (20-20KHz@8 Ohm)- W
USB ports quantity2
Digital audio optical in1
DisplayLCD
Apple dockingNo
Product colorBlack
Center speaker impedance16 Ω
Connector contacts platingGold
Headphone connectivity3.5 mm
Audio formats supportedALAC, CBR, DSD, FLAC, MP3, MP3 VBR, MQA, WAV
Bluetooth version4.1
Bluetooth profilesA2DP, AVRCP
FM band range87.5 - 108 MHz
Supported radio bandsDAB+, FM
Internet radio services supportedDeezer, Spotify, Tidal, TuneIn
Optical drive typeCD player
Disc types supportedCD, CD-R, CD-RW
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2.9 W
Power consumption (typical)36 W
Package weight3800 g
Cables includedAC
Package depth276 mm
Package width345 mm
Package height235 mm
Weight and Dimensions IconWeight and Dimensions
Depth295 mm
Width215 mm
Height117 mm
Weight2700 g

Related product manuals