EasyManuals Logo

Onkyo CR-N775D User Manual

Onkyo CR-N775D
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
> Before Start >Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
5
En
Rear Panel
1. SPEAKERS terminals: Connect speakers with the speaker cables.
2. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH
wireless technology enabled device. Adjust their angles according to the
connection status.
3. SUBWOOFER PRE OUT jack: Connect a subwoofer with built-in amplifier.
4. LINE OUT jacks: Connect a recording device, such as a cassette tape deck.
Connect to the LINE IN jacks on the recording device using analog audio cable.
5. LINE IN jacks: You can play the audio from an external device such as a television
connected with an analogue audio cable.
6. DAB/FM ANTENNA jack: Connect the supplied DAB/FM wire antenna.
7. NETWORK jack: Connect to the network with an ethernet cable.
8. jack: Connect an Onkyo product with an RI jack using an RI cable to
synchronize with this unit. (ÄP29)
9. AC INLET: Connect the supplied power cord.
10.
USB port: Connect a USB storage device or HDD (hard disk drive) to play music
files. You can also supply power (maximum 5 V/1 A) to USB devices with a USB
cable. It is also possible to save or delete music files on the USB HDD with a
computer over the network. (ÄP33)
11.
DIGITAL IN OPTICAL/COAXIAL jacks: You can play the digital audio from an
external device such as a television connected with a digital optical cable or a
digital coaxial cable.
180°
90°

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo CR-N775D and is the answer not in the manual?

Onkyo CR-N775D Specifications

General IconGeneral
Receiver type-
Input sensitivity400 mV
Pre-out connectivityYes
Audio output channels2.0 channels
Power output per channel (20-20KHz@8 Ohm)- W
USB ports quantity2
Digital audio optical in1
DisplayLCD
Apple dockingNo
Product colorBlack
Center speaker impedance16 Ω
Connector contacts platingGold
Headphone connectivity3.5 mm
Audio formats supportedALAC, CBR, DSD, FLAC, MP3, MP3 VBR, MQA, WAV
Bluetooth version4.1
Bluetooth profilesA2DP, AVRCP
FM band range87.5 - 108 MHz
Supported radio bandsDAB+, FM
Internet radio services supportedDeezer, Spotify, Tidal, TuneIn
Optical drive typeCD player
Disc types supportedCD, CD-R, CD-RW
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2.9 W
Power consumption (typical)36 W
Package weight3800 g
Cables includedAC
Package depth276 mm
Package width345 mm
Package height235 mm
Weight and Dimensions IconWeight and Dimensions
Depth295 mm
Width215 mm
Height117 mm
Weight2700 g

Related product manuals