EasyManuals Logo

Onkyo CR-N775D User Manual

Onkyo CR-N775D
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
> Before Start > Part Names > Install > Initial Setup >Playback
Supplementary information | Advanced Setup | Others
34
Using the alarm to start play
1
2
Settings
At the set time, the unit switches on and starts play of
the desired source. You can set two different timers,
"Timer 1" and "Timer 2". Make sure that the clock on
this unit is set correctly. You cannot use the timers if the
clock has not been set.
1. Press on the remote controller to display the
menu.
2. Press 3/4 (b) to select "Timer", then press ENTER
(c).
3. Press 3/4 (b) to select "Timer 1" or "Timer 2" and
press ENTER (c).
4. Press ENTER (c) when "Timer Set" is displayed.
5. Press 3/4 (b) to select the source to use for timer
play, then press ENTER (c).
0 The sources you can select are "CD", "FM/DAB"
and "MD".
When you select "FM/DAB", press 3/4 (b) to
select a preset station and press ENTER (c). If
there are no stations preset, "FM/DAB" is not
displayed.
To select "MD", you first need to go to the menus
"Option" - "Input Name" to set an input for a jack
to "MD". If "MD" is not set for an input, nothing is
output when the timer starts.
6. Press 3/4 (b) to select "Every" or "Once" and press
ENTER (c).
If you select "Every", select days of the week from
Timer
Asb
Timer 1
Timer 2
Clock

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo CR-N775D and is the answer not in the manual?

Onkyo CR-N775D Specifications

General IconGeneral
Receiver type-
Input sensitivity400 mV
Pre-out connectivityYes
Audio output channels2.0 channels
Power output per channel (20-20KHz@8 Ohm)- W
USB ports quantity2
Digital audio optical in1
DisplayLCD
Apple dockingNo
Product colorBlack
Center speaker impedance16 Ω
Connector contacts platingGold
Headphone connectivity3.5 mm
Audio formats supportedALAC, CBR, DSD, FLAC, MP3, MP3 VBR, MQA, WAV
Bluetooth version4.1
Bluetooth profilesA2DP, AVRCP
FM band range87.5 - 108 MHz
Supported radio bandsDAB+, FM
Internet radio services supportedDeezer, Spotify, Tidal, TuneIn
Optical drive typeCD player
Disc types supportedCD, CD-R, CD-RW
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2.9 W
Power consumption (typical)36 W
Package weight3800 g
Cables includedAC
Package depth276 mm
Package width345 mm
Package height235 mm
Weight and Dimensions IconWeight and Dimensions
Depth295 mm
Width215 mm
Height117 mm
Weight2700 g

Related product manuals