EasyManuals Logo

Onkyo CR-N775D User Manual

Onkyo CR-N775D
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
> Before Start > Part Names > Install > Initial Setup >Playback
Supplementary information | Advanced Setup | Others
35
En
amongst "Everyday", "Sunday", "Monday",
"Tuesday", "Wednesday", "Thursday", "Friday",
"Saturday", "Mon-Fri", "Tue-Sat", and "Sat-Sun" and
confirm. If you select "Once", select a day of the
week from amongst "Sunday", "Monday", "Tuesday",
"Wednesday", "Thursday", "Friday", or "Saturday"
and confirm.
7. Use 3/4 (b) to set the start time for the alarm, the
end time, and the volume (0 to 50) in turn, then
press ENTER (c) to confirm each selection.
0 The TIMER indicator lights when the settings are
complete, and the content you set is displayed on
the display.
8. Press Í (a) to switch the unit to standby.
0 The alarm does not work when this unit is on.
Check whether the alarm setting is On or Off: When
the TIMER indicator is on and red, the alarm is on. The
alarm is off if the indicator is off.
Turning the alarm setting On or Off: If the alarm is
already set, you can turn the function on or off.
1. Press on the remote controller to display the
menu, press 3/4 (b) to select "Timer", then press
ENTER (c).
2. Press 3/4 (b) to select "Timer 1" or "Timer 2" and
press ENTER (c).
3. To turn off, press ENTER (c) when "Timer Off" is
displayed.
0 To turn on, press ENTER (c) when "Timer On" is
displayed.
0 Press 3/4 (b) to select "Timer Call", then press
ENTER (c) to check the content you set.
4. Press Í (a) to switch the unit to standby.
b
c
a

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo CR-N775D and is the answer not in the manual?

Onkyo CR-N775D Specifications

General IconGeneral
Receiver type-
Input sensitivity400 mV
Pre-out connectivityYes
Audio output channels2.0 channels
Power output per channel (20-20KHz@8 Ohm)- W
USB ports quantity2
Digital audio optical in1
DisplayLCD
Apple dockingNo
Product colorBlack
Center speaker impedance16 Ω
Connector contacts platingGold
Headphone connectivity3.5 mm
Audio formats supportedALAC, CBR, DSD, FLAC, MP3, MP3 VBR, MQA, WAV
Bluetooth version4.1
Bluetooth profilesA2DP, AVRCP
FM band range87.5 - 108 MHz
Supported radio bandsDAB+, FM
Internet radio services supportedDeezer, Spotify, Tidal, TuneIn
Optical drive typeCD player
Disc types supportedCD, CD-R, CD-RW
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2.9 W
Power consumption (typical)36 W
Package weight3800 g
Cables includedAC
Package depth276 mm
Package width345 mm
Package height235 mm
Weight and Dimensions IconWeight and Dimensions
Depth295 mm
Width215 mm
Height117 mm
Weight2700 g

Related product manuals