40
Adjusting the Tone
Press S.BASS repeatedly.
Pressing S.BASS repeatedly will change the option in
the following order.
Press MUTING on the remote controller. The MUT-
ING indicator lights in the display.
To restore the sound, press MUTING again.
Tip
During muting:
• If you press VOLUME on the remote controller, the
sound will be restored.
• If you turn the unit off and then on again, the sound will
be restored.
Decrease the volume, then connect the stereo head-
phones mini plug to the PHONES jack.
You can adjust the volume and mute the sound as
described above.
The speakers will reproduce no sound while the head-
phones are connected.
MUTING
S.BASS
Emphasizing the low end using the
remote controller
S.Bass Off
S.Bass 1
(Low end is emphasized.)
S.Bass 2
(Low end is even more emphasized.)
Muting the sound
Listening through the headphones
MUTING
/
To PHONES jack
To Next Page
Loading...
