56
Editing Tracks—Continued
•You can execute this function only when the input
source is MD and the unit is stopped or paused.
•To cancel the operation, press MD .
Erasing a selected track – Erase
1
Insert the MD, then select MD as
the source.
2
Turn MULTI JOG to select a track
to erase.
3
Press EDIT/NO/CLEAR and turn
MULTI JOG until “Erase?”
appears in the display.
4
Press MULTI JOG to erase the
track.
“Complete” appears in the display.
The selected track is erased and all the
other remaining tracks are renumbered
from the top.
1
3
1
2-4
DISPLAY
SOURCE
1 2 34
134
123
Deleting the selected track
Renumbering the tracks
To Next Page
Loading...
