Onkyo FR-X7A - Page 64

64
Using the Timer Functions—Continued
To reprogram the timers, press EDIT/NO/CLEAR and follow the procedure from the beginning.
6
Turn MULTI JOG to set the On time of the timer operation.
You can also use the number buttons on the remote controller.
When the desired time is displayed, press MULTI JOG.
For example, to set 7:29, press 0, 7, 2, then 9.
•For the am/pm indication, press the --/--- button to toggle between am and pm.
Note
• When you set the On time, the Off time is automatically set to one hour later.
• During timer recording on an MD on the FR-X7A, the first few seconds may not be recorded. Set
the On time to one minute earlier.
7
Turn MULTI JOG to set the Off time for the timer operation.
When the desired time is displayed, press MULTI JOG.
8
Place the unit in Standby mode.
Press STANDBY to place the unit in Standby mode.
Note
•Even if you set Memory, Random, 1TR, or 1GR mode for MD timer playback, the FR-X7A will per-
form normal playback at the timer On time.
• If the unit is not in Standby mode, the programmed timer operation will not start at the timer on
time. Be sure to place the unit in Standby mode to activate timer operation.
• If you try to set the Sleep timer or press TIMER during timer operation, the current timer setting is
cancelled.
TIMER
TIMER
TIMER
A square appears
if the Timer Rec operation
is programmed.
Timer setting indication
Selected
timer number