Onkyo HT-R391 User Manual

Appendix
En-58
The AV receiver contains a microcomputer for signal
processing and control functions. In very rare situations,
severe interference, noise from an external source, or
static electricity may cause it to lockup. In the unlikely
event that this happens, unplug the power cord from the
wall outlet, wait at least five seconds, and then plug it
back in.
Onkyo is not responsible for damages (such as CD
rental fees) due to unsuccessful recordings caused by
the unit’s malfunction. Before you record important
data, make sure that the material will be recorded
correctly.
Before disconnecting the power cord from the wall
outlet, set the AV receiver to standby.

Onkyo HT-R391 Specifications

General

Type	AV Receiver
Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
4K Passthrough	Yes
3D Support	Yes
Audio Return Channel (ARC)	Yes
Frequency Response	20 Hz - 50 kHz
Bluetooth	No
Video Upscaling	No
Power Output	100W per channel (6 ohms, 1 kHz, 1% THD)
Dolby Formats	Dolby TrueHD, Dolby Digital Plus
DTS Formats	DTS-HD Master Audio
Dimensions	435 x 150 x 318 mm
Inputs	HDMI, Optical, Coaxial, Analog Audio
Outputs	HDMI
Weight	16.5 lbs (7.5 kg)