Onkyo HT-R520 Service Manual

REMOTE CONTROLLERS-4
RC-567M/569M/570M
TX-SR502/E/8250/HT-R520
A-B button
This button is used to set the A-B repeat playback function.
14
OPEN/CLOSE [ ] button
This button is used to open and close the disc tray.
15
VIDEO OFF button
This button is used to turn off the internal video circuitry,
eliminating the possibility of interference
when playing audio-only discs.
16
CLEAR button
This button is used to cancel functions and to clear entered numbers.
17
MENU button
This button is used to display a DVD's menu.
18
VOL button
This button is used to set the volume of the unit.
19
SETUP/GUIDE button
This button is used to access the DVD player's onscreen setup menus.
20
MUTING button
This button is used to mute the unit.
21
RANDOM button
This button is used with the random playback function.
22
ANGLE button
This button is used to select different camera angles.
23
LAST M button
This button is used with the last memory function,
which allows you to resume DVD playback from where you left off.
24
SEARCH button
This button is used to search for titles, chapters,
tracks, and specific points in time.
25
MEMORY button
This button is used with the memory playback function,
which allows you to create a custom playlist of titles,
chapters, or tracks.
26
CD Mode
CD mode is used to control an Onkyo CD player connected
to the unit via .
To set the remote controller to CD mode, press the [CD] mode button.
ON button
This button is used to set the CD player to On or Standby.
Before selecting CD mode and starting playback, you should
press the [AMP] mode button followed by the [CD] input
selector button to select your CD player as the input source.
1
Number buttons
These buttons are used to enter track numbers and
to enter times for locating specific points in time.
2
DISC button
This button is used to select discs on a CD changer.
3
DISPLAY button
This button is used to display information about the current disc or track
on the CD player's display, including the elapsed time, remaining time,
total time, and so on.
4
Playback buttons
From left to right: Previous, Play, Next, Fast Reverse, Pause, Stop,
and Fast Forward.
5
REPEAT button
This button is used to set the repeat playback functions.
6
OPEN/CLOSE [ ] button
This button is used to open and close the disc tray.
7
CLEAR button
This button is used to cancel functions and to clear entered numbers.
8
VOL button
This button is used to set the volume of the unit.
9
MUTING button
This button is used to mute the unit.
10
RANDOM button
This button is used with the random playback function.
11
MEMORY button
This button is used with the memory playback function,
which allows you to create a custom playlist of tracks.
12

Onkyo HT-R520 Specifications

General

Brand	Onkyo
Model	HT-R520
Category	Receiver
Language	English