Onkyo K-611

Useful
Recording
Functions
@ MONITOR
2S HSS RR APR AE
z a
| |
fe]
Ta |
m
ie > U n m iw]
aes
ae
aes |
» .
—
| 1
|
ae
ie
_|
; mar P ciapseo | Pfs ott ft
;
ea
fe
cach
dt
| g
ap ELAPSED a ae oe a
Pm carsen of | ft tf
i
i
‘
i
MONITOR
SOURCE TAPE
ae
12
@® Press the REC/PAUSE button and the
bm Play button to begin recording.
@® Press the AUTO SPACE button at any
point during a recording where you
want to enter a blank section about five
seconds long.
e The indicator flashes on and off.
e After the blank section has been in-
serted, tape transport stops automat-
ically, the deck returns to the rec/pause
standby mode.
® To continue recording, press themPlay
button.
e The AUTO SPACE button works in
both the record and rec/pause modes.
f gw To Insert a Blank Section of Tape
Less Than Five Seconds Long
Press the REC/PAUSE bullon to
return to the rec/pause standby mode or
press the BPlay button before the five
second period has clapsed.
|g To Insert a Blank Section of Tape
More Than Five Seconds Long
Hold the AUTO SPACE buiton down
for as long as you want the blank sec-
tion to be. The deck will return to the
rec/pause standby mode immediately
when the button is released.
This deck is a three-head deck, so by
switching between the SOURCE and
TAPE seltings you can compare the signal
_ which has just been recorded on the tape
with the source signal.
a Listening to the Original Source
Signal
Press the MONITOR button so that the
SOURCE indicator lights.
When the SOURCE indicato r is lit the
signal from the LINE IN jacks is output.
. gg Listening to the Signal Just
Recorded on the Tape.
Press the MONITOR button so that the
TAPE indicator lights.
When the TAPE indicator is lit the just-
recorded signal from the tapc: is output.