Onkyo T-4355 User Manual

17
Listening to the Radio—Continued
Radio presets can be named for easy identification, and
names may contain up to 8 characters from the follow-
ing selection.
The underscore (_) character is actually a space.
Hints:
• To cancel the naming process without storing the
name, press the [MEMORY] button.
• After the eighth character has been entered, pressing
the [MEMORY] button will move the cursor back to
the first character.
Correcting Characters
If Name Edit mode is not selected, follow steps 1 and 2
in the left column.
Note:
Text editing features such as moving subsequent charac-
ters to the right when a new character is inserted, or
moving subsequent characters to the left when a charac-
ter is deleted are not supported.
Deleting All Characters in One Go
If Name Edit mode is not selected, follow steps 1 and 2
in the left column.
Naming Presets
1
Select the preset that you want to
name.
See page 16 for selecting presets.
2
Press and hold down the [DIS-
PLAY] button for 3 seconds to
select Name Edit mode.
The cursor appears on the display.
3
Use the PRESET [ ]/[ ] buttons
to select the characters.
4
Press the [MEMORY] button to
set the character.
The cursor moves to the next character.
5
Repeat steps 3 and 4 to enter the
other characters. Press the [DIS-
PLAY] button when you’ve fin-
ished.
The radio frequency reappears on the
display.
_ A B C D E F G H I J K L M N O P Q R S T U V W
X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
" ' & ( ) [ ] * + , - . / = ? 0 1 2 3 4 5 6 7 8 9
DISPLAY MEMORY
PRESET
1
Use the TUNING [ ]/[ ] buttons
to select the character to edit.
2
Use the PRESET [ ]/[ ] buttons
to change the character.
3
Press the [DISPLAY] button to
store the name and exit Name
Edit mode.
While holding down the [MEM-
ORY] button, press the [FM
MODE] button.
Note:
Make sure that Name Edit mode is
selected before doing this because if it
isn’t, the current preset will be deleted
instead.
DISPLAY
PRESET
TUNING
CLEAR
FM MODEMEMORY

Onkyo T-4355 Specifications

Power

power supply voltage	AC 220–230 V
power supply frequency	50/60 Hz
power consumption	9 W

FM Tuner Specifications

FM tuning frequency range	87.5 MHz–108 MHz
FM usable sensitivity (Stereo)	17.2 dBf (75 Ω IHF)
FM usable sensitivity (Mono)	11.2 dBf (75 Ω IHF)
FM signal-to-noise ratio (Stereo)	70 dB (IHF-A)
FM signal-to-noise ratio (Mono)	76 dB (IHF-A)
FM total harmonic distortion (Stereo)	0.3% (1 kHz)
FM total harmonic distortion (Mono)	0.2% (1 kHz)
FM frequency response	20 Hz–15 kHz, ±1.5 dB
FM stereo separation	45 dB (1 kHz)

AM Tuner Specifications

AM tuning frequency range	522 kHz–1, 611 kHz
AM usable sensitivity	30 µV/m
AM signal-to-noise ratio	50 dB
AM total harmonic distortion	0.7%

Weight and Dimensions

dimensions	435 x 81 x 310 mm
weight	3.2 kg