Onkyo T-4355

18
Listening to the Radio—Continued
Individual presets can be deleted as follows.
By pressing the T-4355’s [DISPLAY] button repeatedly,
you can view the tuning frequency or text (preset name
or RDS).
Note:
If the current preset doesn’t have a name, no text will be
displayed.
In places where the signal strength is
weak or reception is noisy, press the [FM
MODE] button to listen in mono (AUTO
indicator off). This will reduce the noise
and any break up in reception.
To return to stereo, press the [FM MODE]
button again (AUTO indicator on).
Note:
If you’re using another Onkyo amplifier’s remote con-
troller, refer to its instruction manual for operating
information.
Deleting Presets
1
Select the preset that you want to
delete.
See page 16 for selecting presets.
2
While holding down the [MEM-
ORY] button, press the [FM
MODE] button.
The preset number on the display dis-
appears and the preset is deleted.
Displaying Information
CLEAR
FM MODEMEMORY
Frequency
Text (preset name or RDS)
FM Mode
Tuner Operation with the RC-627S
Remote Controller
(supplied with the A-9355/A-9155)
Selecting FM or AM
This button can be used to
select FM or AM.
Selecting Radio Presets
Press the Down [–] button
to select the previous preset.
Press the Up [+] button to
select the next preset.
Tuning Manually
Press the Down [ ] button to
decrease the tuning frequency.
Press the Up [ ] button to
increase the tuning frequency.
Setting FM mode
This button can be used to
set the FM mode to stereo
or mono.