EasyManua.ls Logo

Onkyo TX-8270

Onkyo TX-8270
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN FR ES IT DE NL SV 繁中
З
JP
Connecting your Unit to a Sonos System
Required Equipment
• WorkswithSonoscertiedOnkyoProduct
• SonosConnect
• RCAAudioCable(SuppliedwithSonosConnect)
How it Works
OnceyourunitisconnectedtotheSonosConnectyouwillbeabletosendany
musicorsourceonyourSonosApptotheunit.BygoingthroughtheSonos
Connect,youcanplayyourunitthroughotherSonosdevicesinthenetworkin
thesamegroup,oryoucanjustplayonyourunit.Further,thepowerofyour
unitturnsonautomaticallywhenmusicstartsplayingontheSonosApp,andthe
linkedfunctiontoswitchinputworks.
Connecting your Unit to Sonos Connect
1. PlugtheSonosConnectintoanunusedinputontherearpanelofyourunit
usingtheRCAaudiocablesuppliedwithyourSonosConnect.Anyinputcan
beusedotherthanthePHONOinput.
• Youcanalsoconnectwithadigitalcable.Fordetails,refertotheinstruction
manualoftheSonos.
Tips
Youcanrenametheinputthatisdisplayedontheunittoamorelogicalname.
Forexample,youcanchangethenameofinputthattheSonosConnectis
pluggedintofrom“CD”(orotherinput)to“SONOS”.Thiscanbedonebygoing
intosection“Source”inthesetupmenuandthenselecting“NameEdit”.Please
refertotheuser’smanualsuppliedwithyourunitfordetails.
Setting up your Unit to work with the
Sonos Connect
Theremotecontrollerdependsonthemodel.
1. Pressthe (SETUP)buttononthesuppliedremotecontrollertoaccessthe
settingsmenu.
2. Usethe or buttonsontheremotecontrollertodisplay"WorksSONOS".
• If"WorksSONOS"isnotdisplayed,select"Hardware"andpress
ENTER,thenusethe or buttonsontheremotecontrollertodisplay
"WorksSONOS".
Setting up your Unit to work with the
Sonos Connect - continued
3. Select"WorksSONOS",andthenpressENTER.
4. Usethe or buttonsontheremotecontrollertoselectthe“Input”thatyou
wantyourSonostobeconnectedto.(TheinputjackconnectedtoSonos
Connectinstep1shownpreviously.)
• ThelinkedfunctionisdisabledwhenyouselectOff.
SN29403425B_SONOS CONNECT_En_onk_181010.indd 1 2018/10/05 9:37:49

Related product manuals