EasyManuals Logo

Onkyo TX-NR509 Firmware Update Guide

Onkyo TX-NR509
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
En
Firmware Update for TX-NR509
To update the firmware of the AV receiver, you can choose from the following two methods:
update via network, or update via USB storage. Choose the one that best suits your
environment. Before proceeding with the update, please read the corresponding explanations
carefully.
Update via network ( page 2)
You need a wired Internet connection to update the firmware.
Update via USB storage ( page 5)
Please prepare a USB storage device such as a USB flash memory stick. You need at
least 32 MB of available space to update the firmware.
Note
Check the network connection before updating.
Do not touch the any cable or device connected to the AV receiver during the updating process.
Do not attempt to access the AV receiver from your PC while it is being updated.
Do not shutdown the power of the AV receiver while it is being updated.
The storage media in the USB card reader may not work.
If the USB device is partitioned, each section will be treated as an independent device.
If the USB device contains a lot of data, the AV receiver may take a while to read it.
Operation is not guaranteed for all USB devices, which includes the ability to power them.
Onkyo takes no responsibility whatsoever for the loss or damage of data resulting from the use of a
USB device with the AV receiver. Onkyo recommends that you back up your important music files
beforehand.
If you connect a USB hard disk drive to the USB port, Onkyo recommends that you use its AC adapter
to power it.
USB hubs and USB devices with hub functions are not supported. Do not connect your USB device via
a USB hub.
USB devices with security functions are not supported.
Limitation of liability
The program and accompanying online documentation are furnished to you for use at your
own risk. Onkyo will not be liable and you will have no remedy for damages for any claim of
any kind whatsoever concerning your use of the program or the accompanying online
documentation, regardless of legal theory, and whether arising in tort or contract. In no event
will Onkyo be liable to you or any third party for any special, indirect, incidental, or
consequential damages of any kind, including, but not limited to, compensation,
reimbursement or damages on account of the loss of present or prospective profits, loss of
data, or for any other reason whatsoever.

Other manuals for Onkyo TX-NR509

Questions and Answers:

Onkyo TX-NR509 Specifications

General IconGeneral
Impedance16 Ω
Frequency range20 - 50000 Hz
Output impedance2200 Ω
Input sensitivity200 mV
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.08 %
Dynamic power per channel (3 Ohm)180 W
Dynamic power per channel (4 Ohm)160 W
Dynamic power per channel (8 Ohm)100 W
Power output per channel (20-20KHz@8 Ohm)130 W
HDMI in4
Audio (L/R) in6
Composite video in1
Multichannel audio input typeRCA
Component video (YPbPr/YCbCr) in2
Connectivity technologyWired
Speakers connectivity typeBanana connector
Audio formats supportedAAC, FLAC, LPCM, MP3, OGG, WAV, WMA
Wi-FiNo
Ethernet LANYes
RDS featuresPS, PTY, RT, TP
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Preset stations quantity40
Internet radio services supportedLast.fm, Napster, vTuner
Supported video modes1080i, 720p
Display-
Product colorBlack
Audio decodersDolby TrueHD, DTS-HD
Volume controlRotary
Apple docking compatibilityiPhone, iPod
AC input voltage230 V
AC input frequency50 Hz
Power consumption (typical)370 W
CertificationWindows 7 CE, EMC
Package weight12500 g
Package depth423 mm
Package width570 mm
Package height297 mm
Compatible operating systemsWindows 7
Weight and Dimensions IconWeight and Dimensions
Depth328 mm
Width435 mm
Height173.5 mm
Weight9200 g

Related product manuals