Onkyo TX-NR5100 - Page 104

104
SetupSetup
4. Source
Analog When giving priority to the input signal from AUDIO IN jacks
• This item can be selected only when the input to be set
is assigned to the AUDIO IN jack in the "1. Input/Output
Assign" - "Analog Audio Input" setting.
 PCM Fixed Mode (Default Value: O󰀨)
Select whether to x input signals to PCM (except multi-channel PCM) when
you select "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set
this item to "On" if noise is produced or truncation occurs at the beginning of a
track when playing PCM sources. Select "O󰀨" normally.
• Each time the "Audio Select" setting is changed, the setting is restored to
"O󰀨 ".
• The setting cannot be changed when "TUNER", "NET", or "BLUETOOTH"
input is selected.
 Video Select
When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the
input from which video is displayed on the TV.
 Video Select (Default Value: Last)
Last Select the video input played immediately prior.
BD/DVD,
GAME,
CBL /SAT,
STRM BOX,
PC,
CD,
TV
Play the video of each input.
• This setting is e󰀨ective for an input selector assigned in
"1. Input/Output Assign" - "HDMI Input".