94
Playback
• DSD audio signals cannot be output to ZONE 2 with the "NET" input selector.
• If ZONE 2 is on, power consumption during standby will increase.
• If ZONE 2 is turned on when the Pure Audio listening mode is selected in the
main room, the mode will automatically switch to the Direct listening mode.
• This function turns off if you use the Bluetooth Transmitter ( →p66).
To disable the function: While pressing and holding the ZONE 2 SHIFT button
on the remote controller, press
.
Playing Back (ZONE 3) ( →p95)
To Next Page
Loading...
