Onkyo TX-NR929 - Connecting to the Network (Optional)

TX-NR929/ DTR-60.5/ DHC-60.5
OPERATION CHECK-9
4.TEST MODE
Auto Measurement Mode
TEST DSP Output ch DSP Output DSP Config. Speaker etc.
No. Frequency Output Relay
Voltage
4-00 ALL 1kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH DSP Gain
4-01 ALL 30Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH DSP Freq.Response
4-02 ALL 20kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH DSP Freq.Response
4-03 FL,FR/SW 30Hz -20dBFS N/L/L/L/L F/C/S/SB DownMix(1) Characteristic(1)
4-04 F,C,SUR,SRB,High,RW,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:LW Separation
4-05 F,C,SUR,SRB,High,LW,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:RW Separation
4-06 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:FL Separation
4-07 FL,C,SUR,SRB,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:FR Separation
4-08 F,SUR,SRB,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:C Separation
4-09 F,C,SR,SBR,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:SL Separation
4-10 F,C,SL,SBR,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:SR Separation
4-11 F,C,SUR,SBRR,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:SBL Separation
4-12 F,C,SUR,SBRL,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:SBR Separation
4-13 F,C,SUR,SBR,HR,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:LH Separation
4-14 F,C,SUR,SBR,HL,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:RH Separation
4-15 F,C,SUR,SRB,High,Wide 30Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:SW Separation
4-16 ALL 1kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH *mute on Muting
4-17 ALL 30Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH *mute on Muting
4-18 ALL 1kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Volume Max.Attenuation
4-19 ALL 30Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH Volume Max.Attenuation
4-20 ALL 20Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH BASS ALL:+10 BASS Max.
4-21 ALL 20kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH TREBLE ALL+10 TREBLE Max.
4-22 ALL 20Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH BASS ALL:-10 BASS Min.
4-23 ALL 20kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH TREBLE ALL-10 TREBLE Min.
4-24 FL +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-25 FR -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-26 C +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-27 SL -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-28 SR +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-29 SBL -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-30 SBR +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-31 FHL -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-32 FHR +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-33 FL -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-34 FR +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-35 C -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-36 SL +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-37 SR -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-38 SBL +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-39 SBR -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-40 FHL +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-41 FHR -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-42 ALL Pulse Max Y/L/L/L/L F/C/S/SB/FH *1,*3 Current Protect
4-43 ALL 1kHz 0dBFS Y/L/L/L/L F/C/S/SB/FH *6,*4
VOLH DETECT,SEC1H="L"
4-46 ALL 1kHz 0dBFS Y/L/L/L/L F/C/S/SB *5 FAN TEST
*2
*3 The following signal is putted out at all channel continuously in TEST4-42
Max
-Max
2mS
2mS
*4 The cooling fan rotate slow speed.
*5 The cooling fan rotate fast speed. Only TX-NR929,DTR-60.5.
*6 VOLH is detected and H/L of SEC1H is changed.
A detection level is the same as the normal mode.
75(-7dB)
Min.(-∞dB)
Max
Max
Max
78(-4dB)
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
82 (0dB)
Max
Max
Max
Min.(-∞dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
Min.(-∞dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
72(-10dB)
82 (0dB)
82 (0dB)
Master Vol.
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
20mS20mS