Onkyo TX-SR309 - Turning On & Basic Operations; Powering On;Off and Playback

17
En
Turning On & Basic Operations
Turning On/Off the AV Receiver
Tip
• See “Auto Standby” about a power management setting (➔ page 34).
Turning On
1
Press 8 ON/STANDBY on the front panel.
or
Press RECEIVER followed by 8 on the remote controller.
The AV receiver comes on, the display lights.
Turning Off
1
Press 8 ON/STANDBY on the front panel.
or
Press RECEIVER followed by 8 on the remote controller.
The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always
turn down the volume before you turn it off.
8ON/STANDBY
8
RECEIVER