Onkyo TX-SR403 - Specifications

TX-SR403/8340
SPECIFICATIONS
Audio Outputs
Analog Outputs TAPE, VIDEO1
Subwoofer Pre Outputs 1
Speaker Outputs SP-A (L, C, R, SL, SR, SB) + SP-B (L, R)
Phones 1
Specifications and features are subject to change without notice.
Power Supply AC 220/230 V, 50/60 Hz
Power Consumption 370 W
Stand-by Power Consumption 0.5 W
Dimensions
(W x H x D) 435 x 150 x 369 mm
17-1/8" x 5-7/8" x 14-1/2"
Weight 8.6 kg (19.0 lbs.)
Video Outputs
S-Video MONITOR, VIDEO1
Composite MONITOR, VIDEO1
Audio Inputs
Digital Inputs Optical: 1
Coaxial: 1
Analog Inputs DVD(MULTICHANNEL), VIDEO1,
VIDEO2, VIDEO3, TAPE, CD
Multichannel Inputs 6
General
Power Output
2 channel driven: 110 W + 110 W (6 , 1kHz, JEITA)
Dynamic Power 160 W + 160 W (3 , Front)
125 W + 125 W (4 , Front)
85 W + 85 W (8 , Front)
THD
(Total Harmonic Distortion) 0.08% (Power Rated)
Damping Factor 60 (Front, 1kHz, 8 )
Input Sensitivity and Impedance 200 mV/ 47 k (LINE)
Output Level and Impedance 200 mV/ 470 (REC OUT)
Frequency Response 10 Hz.100 kHz/ +1 dB-3 dB (Direct
mode)
Tone Control 10 dB, 50 Hz (BASS)
10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio 100 dB (LINE IHF-A)
Speaker Impedance 6 -16
Amplifier Section
Input Sensitivity/Output Level
and Impedance 1 Vp-p /75 (S-Video Y)
0.28 Vp-p /75 (S-Video C)
1 Vp-p /75 (Composite)
Video Section
FM
Tuning Frequency Range 87.5 MHz. 108.0 MHz
Usable Sensitivity Stereo: 17.2 dBf 2 V(75 IHF)
Mono: 11.2 dBf 1 V(75 IHF)
Signal to Noise Ratio Stereo: 70 dB (IHF-A)
Mono: 76 dB (IHF-A)
THD Stereo: 0.3% (1kHz)
Mono: 0.2% (1kHz)
Frequency Response 30 Hz -15 kHz / 1 dB
Stereo Separation 45 dB (1kHz)
AM
Tuning Frequency Range 522 kHz-1611 kHz
Usable Sensitivity 30 V
Signal to Noise Ratio 40 dB
THD 0.70%
Tuner Section
Video Inputs
S-Video DVD, VIDEO1, VIDEO2
Composite DVD, VIDEO1, VIDEO2, VIDEO3