Onkyo TX-SR503E Instruction Manual

E n
AV Receiver
TX-SR503
TX-SR503E
TX-SR8350
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction ..................................... 2
Connection .................................... 15
Turning On & First Time Setup..... 30
Basic Operation
Playing your AV components....... 34
Using the Tuner............................ 36
Enjoying the Listening Modes ..... 42
Advanced Operation ..................... 46
Troubleshooting ............................ 55

Onkyo TX-SR503E Specifications

General

Channels	7.1
Tuning range	FM/AM
Output power per channel	75 W (8 ohms, 20 Hz-20 kHz, 0.08% THD)
Impedance	6 ohms - 16 ohms
Frequency response	10 Hz-100 kHz
Input sensitivity	200 mV
Speaker load impedance	6 ohms - 16 ohms
Digital inputs	2 Optical, 1 Coaxial
Digital Audio Inputs	2 Optical, 1 Coaxial
Video Connections	Component, Composite, S-Video
Weight	10.5 kg
HDMI Inputs	No
Audio Formats Supported	Dolby Digital, DTS
Video Formats Supported	Composite video, S-Video
Total harmonic distortion	0.08 %
Input Sensitivity/Impedance	200 mV/47 kohms
Video Inputs/Outputs	Component, Composite, S-Video
Dimensions (W x H x D)	435 x 150 x 377 mm
Signal to noise ratio	100 dB (Line, IHF-A)
Signal-to-Noise Ratio	100 dB (Line, IHF-A)
Output	75 W per channel (8 ohms, 20 Hz-20 kHz, 0.08% THD)