17
Remote Controller—Continued
For detailed information, see the pages in parentheses.
a STANDBY button (51)
Sets the AV receiver to Standby.
b ON button (51)
Turns on the AV receiver.
c INPUT SELECTOR buttons (70)
Used to select the input source.
d MACRO buttons (141)
Used with the Macro function.
e DIMMER button (71)
Adjusts the display brightness.
f Arrow [q]/[w]/[e]/[r] and ENTER buttons
Used to select and adjust settings.
g CH +/– button (75)
Selects radio presets.
h SETUP button
Used to change settings.
i DISPLAY button (72)
Displays information about the current input source.
j LISTENING MODE buttons (81)
Used to select the listening modes. The [STEREO],
[SURR], and LISTENING MODE [e]/[r] buttons
can be used at any time, regardless of the currently
selected remote controller mode.
k TEST TONE, CH SEL, LEVEL–, and LEVEL+
buttons (71, 100)
Used to adjust the level of each speaker.
l LIGHT button
Turns the remote controller’s illuminated buttons on
or off.
m D.TUN button (74)
Selects the Direct tuning mode for radio.
n REMOTE MODE buttons (16)
Used to select the remote controller modes. When
you press a button, the REMOTE MODE button for
the currently selected mode lights up.
o SLEEP button (72)
Used with the Sleep function.
p VOL [q]/[w] button (70)
Adjusts the volume of the AV receiver regardless of
the currently selected remote controller mode.
q RETURN button
Returns to the previous display when changing set-
tings.
r MUTING button (71)
Mutes or unmutes the AV receiver.
s SP A and SP B buttons (TX-NR906 only)
(8, 23)
Used to select Speakers A or Speakers B.
t Re-EQ button (108)
Turns the Re-EQ function on or off.
u L NIGHT button (109)
Turns the Late Night function on or off.
v AUDIO SEL button (120)
Selects the audio input: analog, digital, HDMI, or
multichannel.
■ TAPE mode
On twin cassette decks, only Deck B can be controlled.
1 Previous and Next [7]/[6] buttons
The Previous [7] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [6] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [7]/[6] buttons may not work prop-
erly with some cassette tapes.
Play [1] button
Starts playback.
Rewind and Fast Forward [5]/[4]
buttons
The Rewind [5] button starts rewind. The Fast
Forward [4] button starts fast forward.
Reverse Play [t] button
Starts reverse playback.
Stop [2] button
Stops playback.
REC [y] button
Starts recording.
To Next Page
Loading...
