Onkyo TX-SV535 - Page 18

Listening to your favourite source
1
2
3
4
SSU&i.
6
7
Before plugging in the unit, confirm that all connections have been
made properly.
L Insert the AC power supply cord into the wall outlet.
The STAND-BY/RECEIVED indicator comes on.
2. Press the POWER button to turn on the power.
3. Press the MAIN speakers button.
MAIN indicator lights up.
4. Press the desired input selector button.
Confirm that the TAPE-2 MONITOR indicator is off when a
source other than the TAPE-2 MONITOR has been selected.
Also check the audio muting is off.
5. Start the selected input source playing.
Follow the operating instructions of that unit.
6. Adjust the volume to appropriate level using the MASTER
VOLUME knob or VOLUME A/V buttons on the remote
control.
7. Ad just the tone controls
18