12
Conventional Scrubbing/Cleaning:
Manually control the water valve to adjust the volume of the cleaning
liquid (water and detergent) owing to the ground.
The brush cleans the oor with the solution, mixing detergent and
water. While the machine advances, pick-up the wastewater on the
oor with the squeegee into the waste water tank.
Machine Water Flow Adjustment
MACHINE OPERATION
Information on Brush and Scouring Pad
To ensure the optimum eciency, please use the correct type of brush for cleaning.
The brush and scouring pad suggested for use are as follows:
It is suggested to
clean the coated oor
without damaging the
oor. Clean without
scratches.
Soft nylon brush
(white)
It is used for scrubbing
slight dirt without
damaging the oor.
It is used for main-
taining a highly
smooth or polished
oor.
It is used for powerful-
ly removing the heavy
coating or base or
super-powerful scrub-
bing.
Crash pad (red)
Gravity folding pad
(black)
Polishing pad (white)
To Next Page
Loading...
Need help?
General
