Charge the Handset
Plug the AC adapter into a power outlet
and then connect the AC adapter cable to
the charging cradle. Put the handset on
the cradle.
When the handset is on its cradle, it will
show a lightning bolt in the battery icon
when it is charging.
STEP 2
We recommend that you leave the handset
on the cradle for 30 minutes before
proceeding to the next step. The handset
requires 10 hours to fully charge.
Register the Handset
Press the Page key on your Ooma Telo and
hold it down for three seconds to activate
registration mode. When the handset
detects the Telo, press the YES soft key
to proceed.
Once the handset is successfully registered,
the home screen will be displayed.
Each Ooma Telo supports up to four Ooma
HD3 Handsets.
STEP 3
Page key on
newer Telos
Page key on
older Telos
6 7
To Next Page
Loading...
Need help?
General
