Need help?Do you have a question about the Openreach ONT and is the answer not in the manual?
General| Manufacturer | Openreach |
|---|---|
| Device Type | Optical Network Terminal (ONT) |
| Power Supply | 12V DC |
| Operating Temperature | 0°C to 40°C |
| WAN | GPON |
| Humidity | non-condensing |
Details the ONT as the demarcation point, its enclosure, and connections.
Explains the BBU's function for voice calls during power interruptions.
Presents options for internal wiring installation and their implications.
Details Openreach's role in installing ONT and BBU, and developer's role.
Provides guidelines for voice and data cabling installation, including specific requirements.
Specifies requirements for fitting electrical sockets and RJ45 boxes.
Details steps for fitting the enclosure, connecting cables, and cleaning ports.
Details pre-connectorised cable availability and installation for SDUs.
Provides steps for running and coiling the pre-connectorised cable.
Emphasizes fire stopping requirements for holes and compartment penetrations.
Details Openreach's installation process for ONT, BBU, and cable in MDUs.
Specifies requirements for laying ducting across carriageways, including depth.
Details minimum depth and straightness requirements for ducting into buildings.
Outlines general principles for duct installation, bends, and backfilling.
Provides guidance on preventing damage to underground networks and contact info.
Introduces the Quadbox™ system for speeding up chamber installation.
Details specifications for Joint Box Footways JBF104 and JBF106.
Provides detailed specifications for base, brickwork, frame, and duct entries.
Warns against fitting unapproved frames and covers and potential actions.
Lists hazardous procedures, products, and processes to be eliminated.
To Next Page