Openreach ONT - Amber lists: Products, processes and procedures to be eliminated or reduced

43
Amber lists
Products, processes and procedures to be eliminated or reduced as
far as possible and only specied or allowed if unavoidable.
Including amber items would always lead to the provision of information to the
principal contractor or contractor where only one contractor has been appointed.
Distribution point (DP) location
• DP’s located into voids or enclosed spaces provided with ventilation systems built in
Cabling routes and lead-ins
• Routing of cables where the cables are above head height within false ceiling systems
• Routing of cables internally where access points require use of access equipment
(ladders, step-ladders or platform steps) to allow for pulling in of cables
Aerial and antenna transmission / receiver systems
• EMF exclusion zones adequately managed with xed barriers or partitioning systems.
Health and safety advice
How to build a fibre network - version 7.1