Oppo BDP-103 Installation Manual

Pro kit installation manual for
Oppo BDP-103 / BDP-103EU
Figure 1
Disconnect the mains cable, and remove the top plate of the player.
Note the yellow marked points where cables must be inserted.
Figure 2
Start by attaching these 3 cables to the kit. The flatcable is inserted by opening the
“flip”-lock, then insert the cable (blue side up), and then close the flip again. If the flip
is difficult to close, please align the cable accordingly so it is perfectly centered. Do not
put excess pressure on the flip.

Oppo BDP-103 Specifications

General

Depth	311 mm
Width	430 mm
Height	79 mm
Weight	4900 g
Device type	Blu-Ray player
Built-in HDD	Yes
HDD capacity	1 GB
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD, DTS-HD Master Audio
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
HDMI ports quantity	3
Disc types supported	BD, BD-R, BD-RE, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD+RW DL, DVD-R, DVD-RW, DVD-RW DL
Playback disc formats	Blu-Ray video
Supported video modes	1080i, 480i, 480p, 576i, 576p, 720p
Card reader integrated	-
USB 2.0 ports quantity	2
Video formats supported	AVCHD, AVI, MKV, MP4
Digital audio coaxial out	1
Operating temperature (T-T)	5 - 35 °C
Power consumption (standby)	0.5 W
Power consumption (typical)	35 W
Signal-to-Noise Ratio (SNR)	115 dB
Operating relative humidity (H-H)	15 - 75 %
Audio output channels	7.1 channels