EasyManua.ls Logo

Oppo BDP-93 - User Manual

Oppo BDP-93
94 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
®
USER MANUAL
READ CAREFULLY BEFORE OPERATION
Blu-ray Disc Player BDP-93

Table of Contents

Questions and Answers

  • R
    Richard BurkeAug 13, 2025
    Why is there no sound on my Oppo BDP-93 Blu-ray Player?
    • K
      Kevin ZamoraAug 13, 2025
      There could be several reasons for no sound. First, ensure the audio cable is properly connected. If it is, check if the mute function is activated and deactivate it by pressing the MUTE button. Also, verify that the volume isn't too low by pressing the VOL + button to increase the volume. If you are playing SACD and using a coaxial or optical digital audio connection, note that this is not supported due to copyright restrictions. Use the analog or HDMI audio output instead. Alternatively, set SACD Priority to CD mode to play the CD layer. The same applies to DVD-Audio, which also requires analog or HDMI output or switching to DVD-Video playback mode.
  • R
    robertsmithAug 16, 2025
    What to do if the Oppo BDP-93 remote control is not working?
    • K
      Kelly HerringAug 16, 2025
      If the remote control isn't working, first ensure you are within the effective range. If that’s not the issue, replace the batteries. If it still fails, the remote control code might be incorrect. To fix this, open the disc tray, aim the remote at the player, and press and hold the ENTER button on the remote for 5 seconds to set the remote code.
  • M
    millerjesusAug 20, 2025
    Why does my Oppo BDP-93 Blu-ray Player show a 'No Disc' or 'Unknown Disc' error?
    • A
      Anita LeeAug 20, 2025
      This error can occur for several reasons. First, eject the disc and check if a disc is actually loaded or if the loaded disc is incompatible. If the disc surface is dirty, eject it and clean any dirt or fingerprints. Ensure the disc is properly loaded with the label side facing up and the record side facing down. Finally, condensation on the laser pick-up head can cause this issue. Turn on the player, eject the disc, and leave the player on for about an hour.
  • U
    ustewartAug 25, 2025
    How to fix Oppo BDP-93 when there is no picture?
    • T
      thomasparkerAug 25, 2025
      If there's no picture, start by checking the video cable to ensure it's properly connected. Next, make sure your TV input is correctly selected to the input where the player is connected. If you have accidentally engaged the “Pure Audio” mode, press the PURE button to cancel it. Finally, the video output format or video system may not be supported by your TV. Select a supported output resolution or, when playback is stopped, press and hold the P/N button, or set the correct TV System in the Setup Menu.
  • G
    garrettcharlesAug 27, 2025
    Why is there no color on my Oppo BDP-93?
    • A
      Andrea SmithAug 27, 2025
      If there is no color, it could be due to several reasons. The video system may not be supported by your TV; when playback is completely stopped, press and hold the P/N button or set the correct TV System in the Setup Menu. Check the saturation setting on both your TV and the player. If you're using component output, ensure the three cables are properly plugged in, not damaged, and that the colors of the plugs match the jacks on both ends. Also, if using composite video output, verify that the cable is correctly plugged into the composite video jack, not a component video jack.
  • K
    Kathryn GonzalesAug 31, 2025
    Why are the colors incorrect on my Oppo Blu-ray Player?
    • E
      Emily WoodAug 31, 2025
      If the colors are incorrect, and you're using HDMI for video output, check the color space setting on both the TV and the player. If you're using component video output, check the three component video cables to ensure the signals match on both ends.
  • S
    Stacy HallSep 4, 2025
    Why is my Oppo Blu-ray Player having temporary function failures?
    • L
      Lisa BowmanSep 4, 2025
      Temporary function failures can occur if you are using a scratched or damaged disc; try replacing the disc. Some functions are unavailable during playback; stop playback completely and try again. Interference from other devices can also cause this; identify interference by turning off other devices, and then relocate or replace the offending device.
  • J
    Jennifer FordSep 7, 2025
    Why are some Setup Menu items grayed out on my Oppo BDP-93 Blu-ray Player?
    • J
      Jeremy RiveraSep 8, 2025
      Some setup options cannot be changed while a disc is playing. Fully stop playback, eject the disc, and then try the Setup Menu again.

Summary

Important Information

Important Safety Instructions

Safety instructions for operation and maintenance.

Precautions, FCC Statement, and Trademarks

General precautions, FCC statement, and trademarks.

Compatible Disc Types

Details on supported disc formats and their features.

Discs that cannot be played

List of disc types that are not supported by the player.

Disc care and handling

Guidelines for cleaning and handling discs.

Notes about BD-ROM compatibility

Information on Blu-ray disc compatibility issues.

Copyright Protection

Details on the product's copyright protection technology.

Region management information

Information on region codes for BD-Video and DVD-Video.

INSTALLATION

Front Panel Controls and Displays

Identification and function of front panel controls and displays.

Rear Panel Connectors

Description and function of rear panel ports.

Remote Control Buttons

Detailed list of remote control buttons and their functions.

Remote Control Features

Back of remote, battery installation, and usage.

Changing the Remote Code

How to set different remote control codes to avoid conflicts.

HDMI Connection to a single TV

Connecting the player to a single TV via HDMI.

HDMI Connection to Two (2) TVs

Connecting the player to two TVs simultaneously via HDMI.

DVI Connection

Connecting the player to a TV using a DVI connection.

Component Video Connection

Connecting the player to a TV using component video cables.

Connecting to an Audio System

Overview of connecting to audio systems.

Connecting to a Receiver;Amplifier with HDMI Input;Output

Connecting to A/V receivers via HDMI for audio.

Connecting to a Receiver;Amplifier with 7.1 ch;5.1 ch Audio Input

Connecting to receivers using 7.1ch/5.1ch analog audio.

Connecting to a Receiver;Amplifier with Dolby Digital or DTS Decoder

Connecting to receivers via digital audio outputs.

Connecting to a Stereo Audio System

Connecting to stereo audio systems via analog cables.

Connecting to a Display and Audio System using Dual HDMI

Using dual HDMI outputs for display and audio.

Connecting to the Internet

Instructions for connecting the player to the internet.

Internet connection through wireless adaptor

Setting up an internet connection using a wireless adapter.

Custom Installation and External IR

Custom installation options and external IR setup.

Setting Up the Player - Easy Setup Wizard

Step-by-step guide for initial player configuration.

Select the Best Output Resolution

Choosing the optimal video output resolution for your TV.

Determine the Display Aspect Ratio

Setting the correct aspect ratio for your TV display.

Select the Audio Setting

Configuring audio output settings.

Complete the Easy Setup Wizard

Finalizing the player setup process.

BASIC OPERATIONS

Disc Playback

Instructions for playing discs.

Fast Playback

How to fast forward or reverse playback.

Pause and Frame-by-Frame

Pausing playback and advancing frame by frame.

Slow Playback

Playing content in slow motion.

Blu-ray Disc Menu Playback

Navigating Blu-ray disc menus.

DVD Menu Playback

Navigating DVD menus.

On-Screen Display

Information shown on the TV screen during playback.

Volume Control

Adjusting the audio volume.

Mute

Muting the audio output.

Audio Language;Track Selection

Selecting audio language or track.

Subtitle Selection

Selecting subtitle language or turning them off.

Angle Selection

Selecting different camera angles for playback.

Picture-in-Picture and Secondary Audio

Using PIP and secondary audio features on Blu-ray discs.

BD-Live

Accessing online content and features for Blu-ray discs.

ADVANCED OPERATIONS

TV System Selection

Setting the TV system standard (NTSC/PAL).

Output Resolution

Changing the video output resolution.

Zooming and Aspect Ratio Control

Adjusting zoom levels and aspect ratios.

Zoom Levels for HDMI 1 Output

Specific zoom levels for HDMI 1 output.

Subtitle Shift

Adjusting the position of subtitles on the screen.

Repeat Playback

Setting playback repeat modes (chapter, title, disc).

Repeat a Selected Section

Repeating a specific section of a disc.

Shuffle and Random Playback

Enabling shuffle and random playback modes for CDs.

Playback by Chapter or Track Number

Jumping to specific chapters or tracks.

Playback from a Specific Location

Starting playback from a specific time or chapter.

Memory and Automatic Resume

Player remembers playback position and resumes automatically.

Viewing Pictures on DVD-Audio Discs

Viewing static pictures included on DVD-Audio discs.

Pure Audio Mode

Enhancing audio quality by disabling video output.

MEDIA FILE PLAYBACK

Playback from a USB or e-SATA Drive

Playing media files from USB or e-SATA drives.

The Home Menu

Overview of the player's Home Menu options.

Playing Music Files

How to play music files from various sources.

Playing Movie Files

How to play movie files from various sources.

Viewing Photo Files

How to view photo files from various sources.

Adding Background Music

Adding background music to photo slideshows.

SETUP MENU OPTIONS

Using the Setup Menu System

How to navigate and use the player's setup menu.

Playback Setup

Configuring playback preferences for discs.

Video Setup

Configuring video output settings.

Audio Format Setup

Configuring audio output formats.

Audio Processing Setup

Configuring audio signal processing.

Device Setup

Configuring player hardware and control functions.

Network Setup

Configuring internet connection and BD-Live access.

REFERENCES

Useful Notes

General usage tips and recommendations.

Troubleshooting

Solutions for common operational problems.

Specifications

Technical specifications of the Blu-ray player.

User Manual Updates Online

Information on obtaining updated user manuals.

Language Code List

List of language codes for player settings.

LIMITED WARRANTY

OPPO Digital, Inc. Limited One Year Warranty

Details of the product's one-year limited warranty.

Oppo BDP-93 Specifications

General IconGeneral
Depth311 mm
Width430 mm
Height79 mm
Weight4900 g
Device typeBlu-Ray player
Built-in HDDYes
HDD capacity2 GB
Product colorBlack
Audio decodersDTS, DTS-HD, DTS-HD Master Audio, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Disc types supportedBD, BD-R, BD-R DL, BD-RE, BD-RE DL, CD, CD-R, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Playback disc formatsDVD-Audio, DVD-Video, SACD
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Card reader integrated-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio coaxial out1
Analog signal format systemNTSC, PAL
Operating temperature (T-T)5 - 35 °C
Power consumption (standby)0.5 W
Power consumption (typical)35 W
Signal-to-Noise Ratio (SNR)110 dB
Operating relative humidity (H-H)15 - 75 %
Audio output channels7.1 channels
Total Harmonic Distortion (THD)0.002 %

Related product manuals