Faults
- 22 -
optek-Manual--1004-2006-02--TF16-US-2011-06-20
www.optek.com
8Faults
Among other possibilities, you can detect faults whenever an error message on
the converter appears. Try to clear the fault using the following table and the in-
structions given in the chapter "Software" in the instruction manual of the con-
verter. Should you have any difficulty clearing the fault, feel free to contact our
customer service. To solve the problem efficiently, we ask you to have the sheet
with system data of your sensor or system at hand.
Please find our contact details in chapter 11, page 32.
To Next Page
Loading...
