Optelec ClearView C HD - Menu: Light

Optelec ClearView C
28 English
background with black text and high contrast mode 2 black background with
white text. In addition to the color combinations, there is a greyscale option.
- Activate the menu by pressing the Menu button on the Advanced side
of the Control Pad.
- Use the Zoom dial to scroll through the menu items. Select the menu
option Color and activate this menu by pressing the Mode button.
- Select one of the four high contrast modes with the Zoom dial and
press the Mode button to confirm your choice.
- To select a new high contrast color combination, use the Zoom dial to
scroll through the list of color combinations. Select a color combination
by pressing the Mode button.
- High contrast modes 2, 3 and 4 can be disabled by selecting ’off’.
- Press the Mode button to confirm your choice and exit the menu.
You can select the following color combinations:
- Black – White
- White – Black
- Yellow – Black
- Black – Yellow
- Yellow – Blue
- Blue – Yellow
- Black – Red
- Red – Black
- Black – Green
- Green – Black
- Black – Purple
- Purple – Black
- Blue – White
- White – Blue
- Black – Amber
- Amber – Black
- Greyscale
This function is not available for the ClearView C One.
Menu: Light
This menu item allows you to enable or disable the object light – located at
the left and right of the camera – when the unit is switched on. By default, the
object light is enabled. If you select ’off’, the light will be off when the unit is
switched on.
- Activate the menu by pressing the Menu button on the Advanced side
of the Control Pad.
- Use the Zoom dial to scroll through the menu. Select the menu option
Light and activate this menu option by pressing the Mode button.
- To enable the object light, select the value ‘on’ with the Zoom dial.
Selecting ‘off’ will disable the object light.Press the Mode button to
confirm your choice and exit the menu.
-
This function is not available for the ClearView C One.