Optelec ClearView C
English 29
Menu: Keylock
This menu item allows you to lock or unlock the Advanced buttons on the
Control Pad, with the exception of the Menu button. If the lock is enabled, the
advanced buttons Brightness, Lines, PC and Auto-focus are locked.
To unlock the Control Pad, press and hold the Menu button for 5 seconds to
enter the menu.
To lock the Advanced buttons on the Control Pad:
- Activate the menu by pressing the Menu button on the Advanced side
of the Control Pad.
- Use the Zoom dial to scroll through the menu. Select the menu option
Lock and activate this menu option by pressing the Mode button.
- To lock the Advanced Control Pad, select ‘on’ with the Zoom dial. Press
the Mode button to confirm your choice. Selecting ‘off’ will unlock the
Advanced Control Pad.
- Press the Mode button to confirm your choice and exit the menu.
To unlock the Advanced buttons on the Control Pad:
- Press and hold the Menu button for 5 seconds.
- Use the Zoom dial to scroll through the menu. Select the menu option
Lock and activate this menu option by pressing the Mode button.
- To unlock the Advanced Control Pad, select ‘off’ with the Zoom dial.
Press the Mode button to confirm your choice.
- Press the Mode button to confirm your choice and exit the menu.
This function is not available for the ClearView C One.
Menu: Power off
This menu item sets the time before the ClearView C is automatically
powered off. By default, the power off time is set to 5 minutes. These 5
minutes are activated after the default standby time of 15 minutes. By default,
the unit is therefore automatically switched off after 20 minutes. The Power
off time can be set to 5, 15, 30 minutes and to ’never’.
To Next Page