Optelec FarView - Page 38

Optelec FarView
English Page 38
brightness and press the ‘down’ button to decrease the brightness. The brightness settings will
be saved automatically, even when the unit is switched off. Please note that the brightness
cannot be adjusted when the FarView is connected to an external monitor.
Protect (playback view): pictures stored in the internal memory can be protected from
accidental deletion. Select ‘PROTECT’ while the unit is in playback mode and then press the
right cursor button to confirm your setting. A protection mark will appear on screen to indicate
that the picture is protected. Pressing the ‘up’ and ‘down’ cursor buttons will cancel the
protection settings.
To continue protecting images, select another picture and repeat the same procedure.
Beep (live view and playback view): this can be switched ‘ON’ or ‘OFF’, by pressing the ‘up’ and
‘down’ cursor buttons. By default, sounds are switched on. Sound settings are automatically
saved when switching the unit off and back on again.
Language (live view and playback view): press the ‘up’ and ‘down’ cursor buttons to navigate
the language menu and press the right cursor button to confirm your setting. The language
menu features 7 different language options:
- Japanese
- English
- French
- German