Optelec FarView - Troubleshooting; Resolving Common Issues

Optelec FarView
English Page 43
Cannot save, please delete some images When more than 30 images are stored, the
number of images option cannot be set to 30.
Please make sure to:
 Delete images until the number of
pictures equals or is lower than 30.
 Set the number of images to 100.
Cannot operate The image might be damaged, making it
impossible to protect or rotate the image.
Please delete file.
Memory is full
 Delete images (make sure to cancel
protection settings to delete protected
images).
 Check if the number of images is set to
100.
Memory card access error Please turn the unit off and back on again.
Camera / Lens error Please turn the unit off and back on again.
Communication error Please turn the unit off and back on again.
Troubleshooting
Battery and power source
Questions Answers