Maximum utility charging
current
Note: If setting value in
program 02 is smaller than
that in program in 11, the
inverter will apply charging
current from program 02 for
utility charger.
Available options in SP3000 Initial-P/SP3000 Initial-M:
Available options in SP5000 Initial-P/SP5000 Initial-M:
Setting voltage point back
to utility source when
selecting “SBU priority” or
“Solar first” in program 01.
Available options in SP3000 Initial-P/SP3000 Initial-M:
Available options in SP5000 Initial-P/SP5000 Initial-M:
To Next Page
Loading...
