17
Press red button, to delete all timers.
System
Delete
Press green button to delete the timer you select.
Edit
Press yellow button to edit timer.
3.3 Date/time settings
You can choose auto Date Time Mode to setting date time automatic and manual,
also can select Time Zone to choose zone
automatic and manual.
3.4 Factory Default
Set default the factory settings, by choosing
“Restore all” or “Restore settings”, etc, and
press “OK” button to proceed.
Restore all: Set default software settings and
channels to be factory settings.
Restore settings: Set default only software settings to be factory settings.
3.5 G-Remote
3.5.1 Set on STB
Main menu->System->Network Control(Apple/Android)->WEB remote: choose
“On”->Password: Input one to six character, can use digit,letter,symbol in any
combination.
3.5.2 Need install one APK (Download from internet)in mobile：Sunplus STB
Remote，make sure the wifi of mobile is connect to internet, after the success if
installation, open the application, it can automatically check all the STB in the LAN
To Next Page
Loading...
