Optima Scale OPF-P - Scale Settings

13
SCALE SETTINGS
Scale Settings Mode: In weighing mode, press both [CE] and [TARE] at the
same time to enter the Scale Settings Mode. In this mode they keys mean:
[M+]: Save and enter the next function
[TARE]: Select value
[ZERO]: Select value
[CE]: Clear value
[UNIT WEIGHT]: Back to the weighing mode
Password
After entering the dealer setting mode, the screen will read “C-UER3.0” with
the second line ashing “------” and the third line reading “110824”
• Input the password (The default password is 123456.)
• If you input the wrong password press [CE] to clear
• The instrument will enter the scale setting mode after the correct
password is input
• If you input the wrong password and cant access the setting mode, in-
sert the jump cap JMP1 to the B on the circuit board
Capacity and Resolution Settings
The capacity and resolution of the scale is adjustable. The weighing capacity
range is 1kg-7500kg and the resolution range is 0.001g-2000g. You can
select the proper capacity and resolution according to your requirement.
• After entering the password the rst line will read “POD” and the
capacity setting will ash on the second line
• To change the capacity on the second row, press [ZERO] or [TARE],
then press [M+] to conrm and select the resolution setting
• To change the resolution on the third row, press [ZERO] or [TARE], then
press [M+] to conrm and continue on to the next setting or
[UNIT WEIGHT] to go back to the weighing mode
Password Amendment
• Press [CE] to enter the password amendment mode
• Key in your new password (6 numbers) and then press [M+] to conrm
• Press [M+] again to continue on to the next setting or [UNIT WEIGHT]
to go back to the weighing mode